Into the woods..in daylight

mermaid's a'hoy!

Ok, so plan B or is it S by now? The express parcel hasn't arrived yet from ceramaglas so I have embarked on another idea... I have engraved the image of the mermaid on the blown piece which I will then fill with the enamel mix.


After I have used my blown inclusion with the engraving, Andrew walks past.."package for you"
Ah I think well a bit to late really, nothing to be done I've just used up my blank.

Kate however wasn't going to let this go by..no says she "I have some blown pieces you can use".. So we sort through some pieces and i choose one which seems the right shape (it has a few bobbles on..but i can work around those ..right!). I go and saw off the bit I need give the other half in for much needed cullet. Then off to screen print the decal emulsion over my enamel screen print. I wave it beside the furnace waiting for it to dry. So in the mold room I have basin of tepid water, decal and glass. The decal comes off like pressed noodles impossible to handle and all flibberly flobberly..hmm throw that in the bin SOOOO not going to work. What did I do wrong..OH YES of course what a ninny I am..the stress is obviously effecting my reasoning capabilities and probably my spelling too. For reasons that will be too hard to explain here for the final layer you need to make another scrren print that encompasses the whole area of te design not just the lines...which of course i haven't done. Oh well nothing to lose i'll just slather some on with the squeegee any way..more time spent at the furnace drying a much thicker layer of overcoat...drying dryING DRYING. So again I am in the mould room with a basin of warm water, the Decal, glass AND Howie and Kate. Soaking the decal works, it is still all floppy but slightly more manageable with helpful instruction from Howie. Remember the bobbly glass I mentioned earlier? well I thought it would be easy to avoid but hadn't counted on the decal being to floppy...it basically got put on where it ended up. Much to Howie's amusement the only bobble ended up under the mermaids now rather ample breasts! So now I have two inclusions to choose from. they will both go in the hot box tonight to warm up to 600 for sandcasting tomorrow.

Desperately searching for decal overcoat

Right, so last night I made the humongous decision that I was going to SKIP my theory lessons in the morning to go in search of the lost key of the Decalian empire..sorry the um final ingredient for my decal glass screen printing experiement..but by this moment it did seem rather epic!
Dougie, my knight in shining red armour drove me to my first port of call to pottery supplies in Ryde /homebush. I waited for at least 3/4 an hour while another customer was served (it was a big order so fair enough) and wondered around trying to figure out which tub was the one i wanted. Finally the other customer got his order and went...leaving Corey to help me puzzle out which tub held the stuff I needed which ended up being none as the shipment they had expected hadn't arrived from their other store in Brisbane. THIS IS NOT WHAT I WANT TO HEAR!!! So I bought some binder which smelt more like honey than rocket fuel, a rubber kidney and some wooden tools went out to the van to wail my news at Dougie.. who sensibly said "where else?"
DEeeeeeeeeeeeeeeeeeeeeeeeeeeeeep breath. Well possibly a place in brookvale or Finns. nope to both. Finally in desperation I phoned ceramaglas (who would of course have some but are in Victoria and I need it tomorrow) June (the nice lady at Ceramaglas) said yes we do have some and apparently was going to ask me if i needed any when i ordered the rest of the kit last week..but I sounded as though I knew what i was doing ( nothing could be further from the truth). June said she would express post me a small amount of the stuff and would try to get it out by the end of the day... I thanked her and Dougie drove me to college whilst I wondered if it had all been worth the effort and missing my theory lecture AND tutorial.

Frustration

I had thought I was well planned, but no I missed a few KEY pieces in my preparation. My idea for an inclusion for sand casting was a screen printed piece of pre blown glass. I chatted to Kate who directed me towards ceramaglas and the idea that i would need 'low firing' enamels. Great Thanks Kate..good start. Screen printing stuff was ordered and after speaking to Ceramaglas so was some enamels and decal paper. I excitedly opened the package today to realise that they arrive as powders...hmmmm I need a fluid binder medium ..ooooooooooookaaaaay..where do I get that before thursday? of to Kate again..hurrah there is some and yes I can have some. Phew.
Once I'm home and making the screen I suddenly realise..I am using a decal(so I can wrap my design around a pre blown piece) so that means I have to immerse it in water first and the medium is WATER based....DARN..now what? I don't know yet..plan C has not yet emerged..urk.

screen printing gocco style and wig jigging!

Ok, Final drawing done and photocopied..ready for the chemical less screen printing..my surprised mermaid is ready...